Directions of use:
 

1. Water is required for product to work effectively. The yellow plastic cap must be submerged below water.  Do not remove standing water.  Add water if required.
2. Block overflow vents of opposite sink with a damp rag to prevent air escaping. Remove plug.
3. Place Mr. Plumber aerosol upside down on the drain opening and press firmly for 1 to 2 seconds. For slow moving debris, hold for a few seconds longer.
4. Run hot water to move loosened clog through the drain.
5. If necessary, repeat the application.

Not suitable for use in blocked sinks and pipes where previously used drain cleaners and acids are still present.  Please ensure drain is first properly flushed with warm water to clear these chemicals and then Mr. Plumber Drain Unblocker can be used.

.

WARNING:

Flammable.  Pressurized container – protect from sunlight and do not expose to temperatures exceeding 50°C.  Do not puncture or burn, even when empty.  Keep out of reach of children even when empty.  Do not spray near naked flame or incandescent material.  Keep away from source of ignition – no smoking.  Use in a well-ventilated environment.  Use only as directed.

FIRST AID:

Ingestion: Rinse mouth with water. Do not induce vomiting. If person is conscious give plenty of water to drink. Seek immediate medical help.

Skin: Rinse skin with plenty of water.

Eyes: Rinse with plenty of water for at least 15 minutes and seek immediate medical help.

Inhalation: Remove person to fresh air. If irritation persists, seek medical help.

Storage: Store in a cool, dry, well ventilated place.